The first commercial market for photovoltaic has been the stand-alone systems. When energy supply via the grid of the electric utility is not possible, economic or desirable, PV systems can be installed economically as stand-alone systems. There is great potential for the implementation of stand-alone systems in developing countries, where large parts of the country often still remain without electricity supply. In a stand-alone system, the energy storage in the accumulators and the operation of numerous consumers is realized using direct current. This gives you an opportunity to define and have the desired backup depending upon your requirement by using batteries. We provides a wide range of stand-alone inverters (100W to 2000W) customized for any consumer requirement.

The objective of a stand-alone inverter is to support a variety of consumers/loads. These range from various types of industrial machines, domestic appliances to sensitive electronic devices in communications etc.

Features:

• High efficiency and reliability.
• Wall mounting option.
• Pure Sine Wave output for sensitive appliances.
• THD < 3% on non-leaner load.
• Reverse battery protection.
• Multiple information display panel.
• Lightweight product to easy carry.
• Over load short circuit protection.

A smart solution for uninterrupted power supply … Created with you in mind

Features:

• Cut Down Your Electricity Bills: With the highest Power Factor in this range that ensures optimal power consumption, the Interactive UPS helps you save up to 25% of your electricity bills. Your can soon pay for itself!
• Automatic Low Battery Protection: When in the battery mode, the system checks the batteries to protect them from deep discharge sounding a buzzing alert to alert the user.
• Improves Battery Life: Fuzzy Logic Control based charging technology regulates the charging process and improves battery life substantially.
• For Highest Efficiency: With the world’s most trusted micro controller based technology using MOSFETs, improves the efficiency of the entire system and provides clean, efficient power to all your appliances.
• Battery Overcharge Protection:  Interactive UPS protects batteries from getting overcharged and stops charging if the total DC voltage goes above 60 V.
• No Load Shutdown: If the load is less than 10 W, the system shuts down automatically after 2 minutes, which reduces the dependence on the battery back-up.
• Smart Overload Protection: Interactive UPS protects the system from breakdowns in the battery mode. The auto reset alarm re-tries 4 times and the system shuts down if the load is not reduced after 8 resets.
• Four built-in batteries: Interactive UPS comes with four inbuilt batteries, which are sealed, maintenance-free batteries. Now you can say no to pollution and fears of leakage and hello to a compact system that fits in anywhere into your home or office.
• Graphical Displays: The user-friendly graphical display indicates clearly the exact running condition of your digital UPS. This indication is accompanied with a buzzer sound alerting the user to any anomaly, and eventually shutting down automatically or resetting itself to keep functioning.
• UPS Mode/Wide UPS Mode: Comes equipped with a slider switch that allows the user to choose between UPS mode for sensitive appliances and Wide UPS mode for non-sensitive appliances.
• MCB (Miniature Circuit Breaker): This protects the system and your appliances from any harmful distortions in the main power supply. The Digital UPS is fortified with two MCB’s – one for mains and one for battery supply, which ensure that the battery does not get discharged when in transit or an idle state.
• Rotary Bypass Switch: A Rotary Bypass Switch, placed at the rear of the UPS, can be used to shut down the system in the unlikely even of a breakdown. Thus protecting the system and the battery back-up.

Application:

Interactive UPS is ideal for Small Offices, Cyber Cafés, Multiplexes and Public Libraries and also household appliances. 

• Designed for Deep Cycling Capabilities & Longer Service Life
• Higher Reliability
• Greater Protection against Leakage and Corrosion due to Heat Shield Tamper-proof lid
• Excellent Charge Acceptance
• Larger Electrolyte Volume Reduces Frequency of Water Topping

FEATURES:

• A Perfect Match for your Inverter & UPS System: Your Inverter and UPS System have unique circuitry with demands which cannot be met by just battery. Green pearl Power Bank Batteries are scientifically built, keeping these every factors in mind. They match your appliances perfectly.
• Capable of Withstanding Deep Discharge and Overcharge: Only Green pearl Power Bank Batteries are tough enough to perform under these extreme operating conditions. Thus, they are far more dependable and economical to use. Their capability to withstand deep discharge is due to balanced active material and large electrolyte reserve. Special Lead Alloy Composition ensures low self discharge and resistance to overcharge.
• Intercell Welding: This is through a partition wall and results in better performance while reducing chances of

INVEST IN THE BEST:

• Positive & Negative Plates: The positive and negative plates are of pasted type with sturdy construction. Negative plates are designed to match the power and long life of the positive plates. The active material is a blend of oxide, special additive and expanders for long life and performance.
• PE Separators: Poly-ethylene Separators thus offers the best balanced property spectrum: excellent mechanical and chemical stability as well as good acid availability, low electrical resistance, low pore size & high porosity.
• Strong Containers/Covers: These are made of high quality polypropylene material with excellent resistance against impact and abrasion, thus providing overall protection against damage.
• Vent Plugs: The special design vent plug traps the escaping acid vapor and gases to go out, thus significantly reducing evaporation of water from the cell and resulting in reduced water topping requirements of the battery.

APPLICATIONS:

We are leading firm in the industry, offering technically updated array of Industrial LED Drivers that are valued for seamless finishing and durable standards. Our entire product range is highly durable in nature and has high compressive strength. They can be easily installed in the required machinery and are energy efficient. LED driver 30w to 45w requires minimum maintenance and has elevated durability.

Features:

• Durability
• Low maintenance
• High cooling facility
• Energy efficiently

Specifications:

• PFC: >0.95
• Efficiency: >83%
• THD: <10%
• Ripple: <2v/cispr 15 Class-A

Protections: short circuit auto recovery/ I/P over voltage with stand up to 440 V AC (cutoff @ 305 auto recovery @ 275 V ac/ O/P over voltage/over load

It is widely believed that active harmonics filters (AHF) are very costly and, therefore, are the last choice for power quality solutions.  The answer is it depends.  Every harmonics mitigation and power factor correction device has its place in the market.

Knowing what a solution does for power quality and the advantages and disadvantages of each solution provide optimized solutions with maximum benefits for the user.

Active harmonics filters provide controlled current injection to remove harmonic current from the source side of electrical systems and reactive current to correct for poor displacement power factor (PF).  Active harmonics filters can be applied to a single nonlinear load or many.  The nonlinear loads can be mixed types or devices, such as variable frequency drives (VFD), DC motor speed controls (aka DC drives), uninterruptible power supplies (UPS), or thyristor (DC) power supplies.

In certain industries even a slight fluctuation in voltage can cause the equipment to malfunction or breakdown. The basic use of SCVS is to control any fluctuation in the input voltage and to provide constant output voltage with +/-1% accuracy.

Features:

• Fastest rate of correction up to 70 v/sec
• Quickest response time
• 10 msec (half a cycle)
• Higher overload capabilities for high starting and regenerative currents repeated frequently in CNC machines.
• Compatible with fuel based Generator sets.

The servo voltage control stabilizers have no hunting, no oscillations and no noise generation. Machine-wound variable auto transformer with special carbon brush to minimize carbon deposit and for smooth commutation

Reliability and Benefits:

• Out test lab is fully equipped with all required instruments used for routine and some Type of Tests".
• Outsourced component go through stringent quality checks so that defective and substandard raw material does not reach the assembly line.
• Quality control is maintained at each level of production so that substandard component become part of the finished product.
• The electronics control card is epoxy coated and is protected from high volt AC to prolong the life of the stabilizer.
• The lamination used in the transformer is CRGO, and the copper used for winding the transformer is, electrolyte grade having purity of 99.9% there by of the SCVS, which reduce the energy losses and save electricity.

Applications

Network workstations, v-sat communications, on-line banking, telecom equipments, bio-medical equipments, process control, CNC machines, textile machines and printing machines, etc

An air conditioner is a very tough piece of equipment. It is engineered to withstand all sorts of abuse and keep on running. This is great in most respects, but it can lead to complacency about maintenance. Like a car, air conditioners need regular tune-ups to run properly.

Without regular maintenance an air conditioner loses about 5% of it’s original efficiency for each year of operation. This means that the 12 SEER unit that you bought just a few years ago may be functioning like a 9 SEER unit today! The good news is that you can recover most of that lost efficiency through regular maintenance.

Studies show that with regular tune-ups a unit will maintain up to 95% of its original efficiency. This means that the cost of an annual tune-up is recovered very quickly in savings on your monthly electric bill and reduced repair costs. A properly serviced air conditioner will also do a better job of dehumidifying your home. We offer annual service programs that insure that you will be reminded of the need to service the unit at the beginning of the cooling seasons.

• We revamp all varieties of ACs like window AC, Split AC & Central Air Conditioning.


• Also, we envelop all high-end brands like LG, Samsung, Carrier, General, Voltas, Onida, Godrej, Daikin, Hitachi, Haier, Panasonic etc.


• We cater to commercial as well as Industrial ACs as well. Bulk repairing are an everyday task for us.


• We believe in using only quality spare parts for repairs. Our service co-ordinator shall provide with all the briefings.


• Subject to your approval, most repairs are carried out immediately and the air conditioner is back up and running better than ever.

The service check should include cleaning the condensing unit coils, checking the amp draw of the compressor, oiling the fan motors, checking that belts are well adjusted, and checking the system operating pressures and temperatures against the manufacturer specifications. One of the most important items to check is the coolant level (commonly known as Freon) in the air conditioner. A system that is only 10% low on coolant will cost about 20% more to operate! We recommends that coolant levels be checked every year.

There are some things in addition to yearly tune-ups that you can do to help ensure a high level of comfort and proper system operation. First, buy good filters and change them regularly. Next, keep bushes and other materials away from the outside unit of your air conditioner. Another good idea is to avoid closing supply air outlets in your house. In almost all cases, closing supply outlets is harmful to the operation of the overall system.

Our workshop is well equipped with the latest equipment, measuring Instruments and testing facilities with latest infrastructure and efficient Techno-commercial professionals having substantial experience in the Air Conditioning field. Our technicians are well versed instil commitment and having very good exposure in the field of Air Conditioning so as to facilitate to handle any type of problem smoothly.

Ducted Air Conditioners:
Ducted Air Conditioners are an amalgamation of technology and innovation, as they are well concealed in ceilings, which make them highly suitable for spacious offices, conference rooms, marriage halls, showrooms and other places. We also offer different kinds of services under this category, including AC Installation Service, AC Maintenance Service and AC Repairing Service.

Installation:

• Checking all sites from installation and other related activities. Specially trained and experienced engineers do site visits.
• Evaluating, preparing and submitting technical BOQ for the site and also most competetive quotes.
• Site progress and timely completion of sites using the best materials and workmanship.

Split AC:
Split Air Conditioners can be the right choice for those who own homes/ offices & Commercial with spacious rooms. And since they are portable enough, you can easily mount them in any desired location. While installing these Air Conditioners, we take a note of the size of the room and the magnitude of the crowd occupying it. For this category as well, we offer AC Installation Service, AC Repairing Service and AC Maintenance Service.

Multiple Split AC:
These systems can comprise of big or small indoor units that operate with a common outdoor unit. For these Air Conditioners, we offer AC Installing Service, AC Repairing Service and AC Maintenance Service.

Window AC:
Window Air Conditioners are a suitable option for cooling small spaces. It has an evaporator coil and a condenser coil that cools the room and drains out hot air, respectively. Under this category we offer AC Installation Service, AC Repairing Service and AC Maintenance Service.

Annual Maintenance Contract :

• We provide all types of contracts labour, semi comprehensive and comprehensive for full range of airconditioner.
• It gives us great pleasure in attending and renewing contracts of our prestigious clients year after year. A loyal base of consumers drive us to keep our service engineers on toes always.
• A dedicated software keeps track of all contracts, renewals, and reminder dates for servicing as and when due.
• A referral cum customer loyalty programme is being launched to reduce future costs of servicing for our individual consumers and to increase a long term relationship with our clients. Please contact us to know more about the unique programme.

Repair Service :

• All types of repairs whether on site or in workshop undertaken.
• Imported vacuum pumps and tools are available for repairs and evaluations.
• Spares procurement for different products and models at reasonable charges.
• Compressors replacements done at site (for splits & ductables) and in workshop (for windows).
• Estimates for repairs provided.
• Product upgradations suggested and provided after through technical study.

Metal fabrication is the building of metal structures by cutting, bending, and assembling processes. It is a value added process that involves the construction of machines and structures from various raw materials.

Structural steel and sheet metal are the usual starting materials for fabrication, along with the welding wire, flux, and fasteners that will join the cut pieces. As with other manufacturing processes, both human labor and automation are commonly used. The product resulting from fabrication may be called a fabrication. Shops that specialize in this type of metal work are called fab shops. The end products of other common types of metalworking, such as machining, metal stamping, forging, and casting, may be similar in shape and function, but those processes are not classified as fabrication.

Cutting is done by sawing, shearing, or chiseling (all with manual and powered variants);

Bending is done by hammering (manual or powered) or via press brakes and similar tools. Modern metal fabricators use press brakes to either coin or air-bend metal sheet into form.

Assembling (joining of the pieces) is done by welding, binding with adhesives, riveting, threaded fasteners, or even yet more bending in the form of a crimped seam.

• Control Panel Fabrication
• Electricians (Low,Med,High)
• Millwrights
• Pipe Fitters
• Project Management
• Sheet Metal Fabrication
• Welders
• CNC Operators / Machining
• Machine Assembly
• Cupboard
• Rake
• Sheet metal woks
• Panel board